Inserted pipe poles - medium voltage pipe manufacturing materials

 

Inserted pipe poles - medium voltage pipe manufacturing materials

table (2)

Individuals and anatomy of materials for columns of pipes listed for medium voltage

It is known that the quality of the raw materials used in the manufacture of pipes of columns listed for medium voltage is steel materials 37-2, hot drawn.

Operation cards are made by the General Administration of Production Planning with the lengths and dimensions of the thin slices and the thickness of each pipe in the case of non-typical production so that each pipe is produced separately and in the numbers received from the requesting party.

In the case of standard production, the length of the slide is six meters, as production is carried out from typical production lines for pipes and according to the required diameters.

The raw materials required for the manufacture of black iron pipes are also supplied from suppliers and producers of raw materials and from factories designated for this in the form of ready-made mortuary rolls. Medium voltage suspension shaft.

table(2)

Anatomy of raw materials, steel 37-2, for columns of inserted pipes - medium voltage

M statement:                   typical production,                                          atypical production

                                length      diameter     thickness                             length    diameter    thickness

1  Bottom Connection      -            -                     -                              4m          25,39cm        5.56mm

2  Middle joint                 -             -                     -                                4m       20,31cm        5.56mm

3  Top link                        -              -                    -                             4,5m       15.23cm          4,5mm

4  Full Bottom Pipe       6m         25,39cm      5.56mm

5  middle full pipe         6m        20,31cm       5,56mm

6  full upper pipe           6m        15,23cm        4,5mm